LG Dryer Installation Guide

Creating a cozy and peaceful summer home requires carefully selected appliances that enhance comfort without sacrificing style and efficiency. Appliances 4 Less springfield offers residents of Bolivar, aMarshfield, Willard, Nixa and Seymour a selection of opened, scratched and dented appliances that are perfect for your summer living. Here is our guide to the must-have appliances for a cozy summer home.

In daily life, clothes are easy to mildew on rainy days, and it is difficult to change dry clothes after busy work. The LG Dryer is a good tool to solve these problems. But if you don't pay attention to the installation, you'll have a lot of trouble. The following installation guide will help you choose the right one for you.

1.Preliminary Preparation

Before installation, the materials of the tools should be ready. Screwdriver, Wrench, level, tape measure, knife is an essential tool. Materials in addition to the original equipped drain pipe, exhaust pipe, stack kit, screws, etc. , but also need extra preparation, such as the length of the drain pipe is not enough, buy extension pipe in advance; worry about the tightness of the exhaust pipe, ready to seal tape. Site planning should not be ignored. Measure the size of the space, the dryer before and after about at least 10 cm space, the top set aside more than 20 cm to facilitate heat dissipation and maintenance. Installation position to facilitate access to put clothes, height to adults standing can easily operate appropriate, the bottom of the ground from 80-100 cm. At the same time, avoid direct sunlight and humid environment, to prevent equipment damage.

2.Installation of drain and exhaust pipe

Before installing the drainage pipe, carefully check the surface cracks, sealing ring at the interface is intact, there are problems in time to replace. Insert the drain pipe into the drain outlet according to the instruction, pay attention to the depth and angle, and fix it with the special clamp of the factory, with moderate tightness. Pull lightly after installation to check for firmness. Drain to follow the natural slope, 10 °-15 ° slope, through the walls or floors, pre-drilling and wrapped with protective cover, avoid wires, pipes and other obstacles. Exhaust type dryer exhaust pipe installation, according to the power and exhaust air selection exhaust pipe, power is large diameter to thick, generally between 75-100 mm, choose good quality, good flexibility. Try to shorten the exhaust pipe length, lengthening each increase of 1 meter, diameter increased by 1-2 cm, to avoid excessive bending, elbow angle is not less than 90 degrees. Vents to the outside, away from doors and windows, vents, fixed with a dedicated exhaust hood, regular cleaning debris, installed on the wall to ensure adequate load-bearing capacity.

3.Stacking, power supply and grounding

Stack installation must use LG original stack kit, check before installation is in good condition. Install the stack bracket on the top of the washing machine smoothly, check the level with the level gauge, and fix the bracket firmly with the original factory screws. Carefully align the mounting holes when placing the dryer. After fixing with the original screws, gently shake to check for stability. Power supply, the dryer is equipped with rated power requirements of the dedicated 16A and above socket, to avoid sharing with other high-power electrical appliances. Check the power socket and wire for damage, aging, timely replacement. Wire specifications to use more than 2.5 square millimeters of copper wire, laying to avoid extrusion, pulling. The dryer must be reliably grounded and connected with a standard grounding wire with a detected grounding resistance of less than 4 ohms.

4.Inspection and debugging after installation

After the installation is completed, a comprehensive inspection of the components are firmly connected, there is no air leakage, water leakage, loose situation. Turn on the power, first run no-load test, check whether the operation is smooth, there is no abnormal noise, and then put a small amount of clothing drying test, observe the effect and time is expected. If there is a problem, contact after-sales maintenance.

Conclusion

LG dryer installation to seriously treat each link, strictly according to the steps to ensure that the installation of solid, stable operation, so that life away from damp and musty.